• If there is insu cient sunlight, you can remove the battery if necessary (see Fig. 2)
and charge it with an external charger.
OPERATION
• Place the solar path light either on the supplied ground spike or with the help of
(not supplied) plugs and screws (see. Fig. 3). Make sure to select a suitable location
(see section: Tips / Notes).
Option 1
1
2
Fig. 3: Setup
• The solar light must be switched
on to charge in sunlight and il-
luminate when it is dark. Set the
on/o switch on the underside
of the solar module to ON (see
Fig. 4).
• Fully charge the battery before
first use (12 hours of direct
sunlight or using an external
charger).
5
3
4
ON /
OFF
Fig. 4: On/o switch
Option 2
x 2
3
2
1