BGS technic 7003 Manual De Instrucciones página 11

SUCK OFF OIL
Disconnect the air supply to the vacuum generator.
The amount of oil extracted can be read on the scale on the glass
cylinder.
Finally, drain the oil in the glass cylinder into the oil tank by opening
the shut-off valve (11) on the underside of the glass cylinder.
EMPTYING OIL TANK
Close the shut-off valve on the air inlet.
The valve is closed if the handle of the valve is positioned crosswise
to the flow direction.
Close the shut-off valve on the suction hose (12).
The valve is closed if the handle of the valve is positioned crosswise
to the flow direction.
Close the shut-off valve (11) on the underside of the glass cylinder.
Close the shut-off valve at the bottom of the tank and the shut-off
valve (2) of the oil collection pan.
Insert the elbow pipe at the end of the drain hose into a waste oil tank.
Continue on the next page --->
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed