Publicidad
Idiomas disponibles
Idiomas disponibles
with Waste Oil Drain Receiver | 80 Liter
TECHNICAL DATA
Oil tank volume: 80 l
Working pressure: 8 to 10 Bar
Vacuum: 0 to -0.8 Bar
Glass cylinder volume: 10 l
Medium: Engine and Transmission oil
Medium temperature: 60 - 100 °C
Dipstick probe: Ø 6 x 4.5 mm
Oil suction rate: 0.4 - 0.8 l/min
Dipstick probe: Ø 8 x 6.5 mm
Oil suction rate: 1.0 - 1.6 l/min
Suction hose length: 1.5 m
Drain hose length: 1.5 m
Net weight: 24 kg
INTENDED USE
This waste oil tank serves the extraction of oils from, e.g. engines,
gearboxes and rear axles. The amount of oil extracted can be determined
using a scale on the glass container and the collecting tank is easy to
empty by charging with compressed air.
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
SAFETY INFORMATIONS
When using pneumatic tools, fundamental precautionary measures must always be ensured in order
to reduce the risk of personal injury and property damage.
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• Ensure that the trigger is located in the OFF position when being connected to the compressed
air system.
• Do not carry out any modifications on the tool.
• Use only accessories that are suitable for use with compressed air tools.
• Disconnect the tool from the compressed air supply before installing accessories, when carrying
out maintenance work or the device is not being used.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Air Oil Extraction Unit
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 7003
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
