Silvercrest SBL 3 D2 Manual De Instrucciones página 73

Proceed as follows to pair the speaker with your mobile phone or
playback device:
• Power on the speaker by pressing and holding the
for approx. 2 seconds.
• Press the M button (9) repeatedly until (12) flashes on the display
(2). The pairing mode is now active for approx. 15 minutes. If no
connection is established during this time, the speaker will turn off.
• Now connect your mobile phone or player via Bluetooth
speaker. See also the operating instructions of your mobile phone.
From the list of found devices, select "SBL 3 D2" and establish the
connection. If you are prompted for a PIN, enter "0000".
• The speaker acknowledges the connection setup with a beep.
(12) is permanently shown on the display (2).
• Now, start playback on your Bluetooth
place via the connected speaker.
SilverCrest SBL 3 D2
®
device. Playback takes
button (1)
®
with the
English - 71