Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Installing the soundbar
IMPORTANT!
•
To prevent injury, the wall mount brackets must be securely attached to the
wall and the soundbar must be correctly slotted into the wall mount brackets.
•
Only use the wall mount bracket and fixings supplied with this product.
Option A
Place the soundbar on a flat, stable surface directly in front of the TV.
Option B
If the TV is wall-mounted, install the soundbar directly below the TV screen.
To mount the soundbar to the wall:
Place the paper wall mount template against the wall. Align the centre line in the
centre of the installation area or, if mounting below a TV, align with the centre of the TV.
Push a small, pointed object through the dot in the circle at each end of the wall mount
template to mark the drill holes' position on the wall. Remove the wall mount template
and then drill the holes (each hole should be approximately 5.5-6 mm in diameter).
Remove the metal screws (x2) from the back of the soundbar and then install the
plastic wall mounting screws onto the back of the unit.
Lift the unit onto the wall mounting brackets and slot into place.
NOTE:
•
If you are installing the wall mount onto a wooden wall, you do not need to
drill holes and use wall plugs, you can simply screw the screws directly into
the wall.
•
Recommended wall mount height is up to 1.5 metres.
Installing the remote control batteries
Remove the battery compartment cover.
Insert 2 batteries (provided) into the battery compartment, making sure to match
the polarity (+/-) as shown.
Close the battery compartment cover.
24
EN
Publicidad
