Playcore Swing-N-Slide PB 8288 Instrucciones De Montaje página 13

Fig. 5
(4)
2'' Lag screws
per Bracket
(3)
1-1/4'' Lag screws
per bracket
UNDERSIDE VIEW
2-1/2'' Wood Screw
2'' Lag Screw
1-1/4'' Lag Screw
3''
Inside to
Inside
Center
Brackets on
4'' x 4'' x 10''
Fig. 5b
Swing Beam Support Cont.:
1. Attach (2) Split Beam Brackets as shown in (Fig. 5).
2. Secure assembly in place on frame as shown in (Fig. 5a).
3. Finish securing assembly in place with 'L' Bracket as shown in
(Fig. 5b).
Double check to make
sure structure is square
Frame 2
13
ssembly Instructions
Fig. 5a
(3)
2-1/2'' wood screws
per joint