Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
Because your circulator moves a substantial amount of air, it will
need regular cleaning. If service is required, return your circulator to
Vornado (see WARRANTY for instructions).
WARNING: To reduce the risk of electrical shock and injury to
persons, unplug the tower before cleaning.
1. Unplug unit before cleaning.
2. Use the brush attachment on your household vacuum cleaner to
vacuum any accumulated dust off the tower.
3. Wipe down the entire tower with a soft cloth.
Note: Do not use gasoline, thinners, solvents or other chemicals for
cleaning.
12 English
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE AND SOLUTION
Unit fails to
Unit is not plugged in. Plug Power Cord into electrical outlet.
power on.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Fuse needs to be replaced. See IMPORTANT SAFETY INSTRUCTIONS for how to replace the fuse or
contact Consumer Service.
Unit is not producing
Ensure unit is set to highest setting for maximum air circulation.
sufficient amount of air.
Allow the unit to fully circulate the air throughout the room, this may take several minutes.
Ensure all air inlets and outlet grille are unobstructed.
Remote Control is not
The battery is dead. Replace with new 3 volt CR2032 battery. Refer to REMOTE CONTROL - BATTERY
working.
REPLACEMENT for instructions.
Remote has not been successfully paired. Refer to REMOTE SETUP for instructions.
13
English
Publicidad
