Shop-Vac P11S Serie Manual Del Usuario página 10

PROBLEM
Parts/accessories
missing
Vacuum cleaner
will not start
Dust discharging
from exhaust
Loss of suction
Static shock
WARNING
DETACHED OR BROKEN, EXPOSING THE MOTOR OR ANY OTHER ELECTRICAL COMPONENTS,
OPERATION SHOULD BE DISCONTINUED IMMEDIATELY TO AVOID PERSONAL INJURY OR
FURTHER DAMAGE TO THE VACUUM. REPAIRS SHOULD BE MADE BEFORE REUSING THE
VACUUM.
FIVE YEAR INDUSTRIAL/COMMERCIAL
Five year limited warranty
Shop-Vac® Corporation warrants the vacuum cleaner motor contained in this package for five years from
date of purchase to correct by repair or parts replacement without charge any motor defect due to faulty
material or workmanship. This warranty only covers the motor and does not cover accessories or any other
components. Use of non-recommended filters and/or accessories may void the manufacturer's warranty.
Shop-Vac® assumes no responsibility for damage or faulty performance caused by misuse, careless
handling, and where repairs or modifications have been made. Do not attempt to service your vacuum
beyond that described in the User Manual. Proof of purchase date is required. The warranty gives you
specific legal rights, and you may have other rights which vary from state to state or province to province.
This warranty is void outside of the United States and Canada.
Customers in the United States: for product service contact Shop-Vac
(570) 326-3557 or go to www.shopvac.com/support. Visit www.shopvac.com for your vacuum's parts
list schematic.
PAGE 10
TROUBLESHOOTING
POSSIBLE CAUSES
1. Packed in tank
1. No power at receptacle
2. Defective switch
3. Defective motor
1. Filter not installed/not installed
properly
2. Filter damaged
3. Filter clogged or dust is too fine
4. Filter not functional
1. Loose hose connection
2. Filter clogged
3. Full tank
4. Hole in hose
1. Dry environment
2. Relative humidity of air is low
–
IF ANY OF THE MOTOR HOUSING PARTS SHOULD BECOME
MOTOR WARRANTY
SOLUTION
1. Check in tank
1. Check for power
2. Contact Shop-Vac
customer service
3. Contact Shop-Vac
customer service
1. Properly install filter
2. Replace filter
3. Use more efficient filter
4. Clean or replace filter
1. Tighten hose connection
2. Clean or replace filter
3. Empty tank
4. Replace hose
1. Add moisture to air (if
practical, use a console
or installed humidifier).
2. This situation is temporary
and does not affect the use
of the vacuum cleaner.
Corporation Customer Service, at
®
®
®