Publicidad
Idiomas disponibles
Idiomas disponibles
Fresh F ood Feotures
Beverage Chiller
TM
(select
models)
The Beverage Chiller
TM
keeps
beverages and other items cooler
than the rest of the fresh food
section. A cold air inlet allows air from the freezer
section to pass into the beverage chiller.
The Beverage Chiller
TM
control is located
on the left wall of the fresh food
compartment.
The control adjusts the
amount of cold air allowed in to the
beverage chiller. For a cooler temperature
in the Beverage Chiller
TM,
slide the control
down.
To Remove:
• First remove the pick off
shelf to the left of the
Beverage Chiller
TM.
• Firmly hold each side of
beverage chiller, lift up
and away from door liner.
To Install:
• Reverse above procedure.
I Note:
Cold air diverted into the Beverage Chiller
TM
can decrease the main refrigerator
temperature.
Refrigerator
control may need to be adjusted.
Storage Drawers
Snack
Drawer
(select
models)
,,=
im
The Snack Drawer can be used for
a 1
storage of miscellaneous
items or
I_
extra produce.
_
//_
To Remove:
• Pull drawer out to full extension. Tilt up front
of drawer and pull straight
out.
To Install:
• Insert drawer into frame rails and push back into
place.
Crisper
Drawers
The Crisper Drawers provide a higher humidity
environment
for fresh fruit and vegetable
storage.
Controls
The Crisper Controls
regulate the amount of humidity
in the crisper drawer. Slide the control toward the low
setting for produce with outer skins. Slide the control
toward the high setting for leafy produce.
Vegetables
O
•
®
o
®
Fruit
high
low
Humidity
Controlled
To Remove:
• Pull drawer out to full extension. Tilt up front of
drawer and pull straight
out.
To Install:
• Insert drawer into frame rails and push back into
place.
Note:
For best results, keep the crispers tightly
closed.
I
13
Publicidad
