Ruroc EOX Manual De Instrucciones página 6

CHIN-CURTAIN
Chin curtains (or Wind stops) are
essential to keeping
excess air from entering your helmet
at high speeds. Not only does this
small device prevent you from being hit
with high velocity wind but also helps to
reduce noise as well as minimises dust,
fumes and bugs.
To install the chin curtain, centralise the unit
to be perpendicular to the chin vents, clip in
either side using the chin curtain wings and the
clips located either side of the EPS between the
EPS and shell. Then through a friction fit insert the
front of the chin curtain ensuring there is no clash
between the wing and the vent body and that the chin
curtain is fully under the lower trim.
To remove simply follow the steps above in reverse.
CLOSED
(UP)
OPEN
(DOWN)
RAID AIR-CONTROL
Thanks to our patented RAID system
your helmet's airflow is second-to-
none! At the flick of a switch you are
able to transfer air directly to yourself
or to the visor. This 'switch' is an
open/close vent at the inside front
of the chin-guard. When the vent is
closed the air is transferred to the
visor creating clean fog-free vision.
When it is opened it offers the rider
more air to breathe.
EOX
M005-MAN-001
AT4_MAN_01-00
unwanted
06
OPEN/CLOSE TOP
VENT
All EOX are equipped with a front
open/close vent to give you more
control over airflow.
airflow (open position) will help to
keep your head cooler on warm
days. Reduced airflow
position) will help to keep you warm
on cooler days.
WWW.RUROC.COM
Increased
(closed