Medivon Smart EMS Manual Del Usuario página 25

Environment humidity: 15%-93%RH;
environment conditions: 700hPa-1060hPa.
b)Storage environment requirements:
Environment temperature: -25℃-+55℃;
Environment humidity: 0-93%RH;
Atmospheric environment conditions: 700hPa-1060hPa.
c)Transport environment requirements:
Environment temperature: -10℃-40℃;
Environment humidity:15%-93%RH;
Atmospheric environment conditions:
6.4 All kinds of working mode of the waveform
Mode 3: Frequency 150-400 Hz, pulse width 20-120μS
Mode 4: Frequency 70-120 Hz, pulse width 20-120μS
Mode 5: Frequency 20-70 Hz, pulse width20-120μS
Mode 6: Frequency1-20 Hz, pulse width80-200μS6.4 All kinds of
working mode of the waveform
Mode 3: Frequency 150-400 Hz, pulse width 20-120μS
Mode 4: Frequency 70-120 Hz, pulse width 20-120μS
Mode 5: Frequency 20-70 Hz, pulse width20-120μS
Mode 6: Frequency1-20 Hz, pulse width80-200μS
7. Method of application
7.1 Power supply operation
1)Adapter to power supply
Insert the output end of power adapter (switched-mode power
supply) into the hole below the average of therapeutic equipment,
and next insert the plug foot of the output end of power adapter
into the AC power outlet.
7.2 How to Operate to Use Its Functions
1) Shift the toggle switch to "ON" position and then apply the
massager close to your neck; if there is some sweat on your neck,
please clear them before use.
2) Hold the remote control and press the button "
after you hear the buzzer beeps once, the power supply indicator
will be on and the default program is enabled: the massager will
work under Impulse Mode 1, Intensity 01 and Level 2 of thermal
moxibustion, with the default time period of 15 minutes; now you
could use the remote control to adjust to the massage mode and
intensity you desire.
3) Press the "
stop mode. The " + " button is to increase the intensity, with one
level increase for each time of pressing it; the " - " button is to
decrease the intensity, with one level decrease for each time of
pressing it. There are 16 levels for adjustment. The default level is
" pulse mode button to select 1-6 mode, 0 is the
700hPa-1060hPa.
" to boot it;