Siemens ICS Schneider Messtechnik CLS200 Manual De Instrucciones página 7

• CLS300 temperature
- rod/cable version
- high-temperature version–40 to +400 °C (–40 to +752 °F)
• CLS300 pressure (vessel):
- 1 to +35 bar, gauge (-14.6 to +511 psi g)
Power
General Purpose and Explosion Proof: 12 to 250 V AC/DC, 2 VA/2W max.
Installation
Notes:
• Installation shall only be performed by qualified personnel and in accordance with local
governing regulations.
• This product is susceptible to electrostatic shock. Follow proper grounding procedures.
• This housing may only be opened for maintenance, local operation, or electrical
installation.
• Before installing the instrument, verify that the environment complies with any restrictions
specified on the device nameplate.
Handling Precautions
WARNING: To prevent damage, all CLS200 Standard units with a rod longer than
2 m (6.5 ft) must be handled as described below.
When lifting CLS200 from a horizontal position, support it at these three points:
At the end of the rod
before the sensor
Once vertical, CLS200 may
be held by the process
connection or flange:
1.
At process connection.
A5E32221251 Pointek CLS200/300 (Standard) – QUICK START MANUAL
1
:
–40 to +200 °C (–40 to +185 °F)
Midway along
the rod
At the process
connection or flange
Note: Unit shown is CLS200 Standard
Extended Rod Version. Handling
precautions apply to all CLS200
Standard units with rods longer than
2 m (6.5 ft).
Page EN-5