Publicidad
Idiomas disponibles
Idiomas disponibles
a. Be aware that wire bristles are thrown by the brush even during ordinary operation. Do not overstress the wires by applying excessive load to the brush.
The wire bristles can easily penetrate light clothing and/ or skin.
b. Allow brushes to run at operating speed for at least one minute before using them. During this time no one is to stand in front or in line with the brush.
Loose bristles or wires will be discharged during the run-in time.
c. Direct the discharge of the spinning wire brush away from you. Small particles and tiny wire fragments may be discharged at high velocity during the
use of these brushes and may become imbedded in your skin.
d. If the use of a guard is recommended for wire brushing, do not allow any interference of the wire wheel or brush with the guard. Wire wheel or brush
may expand in diameter due to work load and centrifugal forces.
e. Do not exceed 15000 min
when using wire brushes.
-1
DO NOT WORK WITH MATERIALS CONTAINING ASBESTOS (ASBESTOS IS CONSIDERED CARCINOGENIC).
TAKE PROTECTIVE MEASURES WHEN WORKING. DUST CAN DEVELOP THAT IS HARMFUL TO ONE'S
HEALTH, COMBUSTIBLE OR EXPLOSIVE (SOME DUSTS ARE CONSIDERED CARCINOGENIC); WEAR A DUST
MASK AND WORK WITH DUST/ CHIP EXTRACTION WHEN CONNECTABLE.
The machine, accessories and packaging should be sorted for environmental-friendly recycling.
Charging Voltage:
Battery capacity:
Operating Voltage:
Safety Warnings Specific For Wire Brushing Operations
Environment
Specifications
General Specifications
5V/DC
2000mAh
8V/DC
Disposal
No-load speed:
Collet Capacity:
MAX Diameter:
06
5000-30000RPM
1.6MM, 2.3MM, 3.2MM
φ3.2MM
Publicidad
