klover BI-FIRE Manual De Instrucciones página 76

Find all of the parameters in detail below:
UT01
The parameter allows to set the current day of the week, select functioning day by day (weekly mode) or disconnect programming.
Lun
Mar
Mer
Gio
Ven
Sab
Dom
OFF
It is possible to set 4 time intervals when to switch the thermo stove on during the day. If the UT01 parameter is set with the current day (for example
Tuesday/Tue) it is possible to associate the ignition of PROGRAM 1, 2, 3 and 4. By pressing buttons 1 and 2 the desired value can be selected. This can be
carried out for every day of the week, as there is the possibility to select on which days to ignite the thermo stove and on which days to leave it off.
UT02
The parameter allows to set the current time. The time is shown in the lower display.
UT03
Used to set the minutes.
UT04
Reserved technical parameter. Only for After-sales centres.
UT05-UT06
Parameters to respectively set the switch-on and switch-off time of PROGRAM 1. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT07
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 1 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the thermo stove. The example that follows shows ignition of the thermo stove
takes place only on Saturday and Sunday.
Lun Mer
Monday Tuesday
Lun/off Mar/off
UT08-UT09
Parameters to respectively set the switch-on and switch-off time of PROGRAM 2. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT10
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 2 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the thermo stove. The example that follows shows ignition of the thermo stove
takes place only on weekdays.
Lun Mer
Monday Tuesday
Lun/off Mar/off
UT11-UT12
Parameters to respectively set the switch-on and switch-off time of PROGRAM 3. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT13
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 3 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the thermo stove. The example that follows shows ignition of the thermo stove
takes place only on Saturday and Sunday.
Lun Mer
Monday Tuesday
Lun/off Mar/off
UT14-UT15
Parameters to respectively set the switch-on and switch-off time of PROGRAM 4. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT16
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 4 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the thermo stove. The example that follows shows ignition of the thermo stove
takes place only on Saturday and Sunday.
Lun Mer
Monday Tuesday
Lun/off Mar/off
Upper display
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Chrono-thermostat off
Mer Gio
Wednesday Thursday
Mer/off Gio/off
Mer Gio
Wednesday Thursday
Mer/off Gio/off
Mer Gio
Wednesday Thursday
Mer/off Gio/off
Mer Gio
Wednesday Thursday
Mer/off Gio/off
16
Meaning
Ven Sab
Friday Saturday
Ven/off Sab/on
Ven Sab
Friday Saturday
Ven/off Sab/on
Ven Sab
Friday Saturday
Ven/off Sab/on
Ven Sab
Friday Saturday
Ven/off Sab/on
Dom
Sunday
Dom/on
Dom
Sunday
Dom/on
Dom
Sunday
Dom/on
Dom
Sunday
Dom/on