Publicidad
Package Contents
(1) Sidekicks Foot (individual or pair)
(1) TruLube Lubricant
This diagram is to help familiarize you with the unique parts of the Sidekicks. These parts are referenced in the
instructions and used when speaking with a technical service representative.
Key Components (Figure 1)
Endo Ankle Bone
A.
Bumpers (2)
C.
Ankle Bushings (2)
E.
Stride Control
Adjustment
®
G.
PRODUCT DESCRIPTION
This prosthetic foot device is constructed with an endo ankle bone, foot plate, bumpers, bushings, axial pin, and
screw. The foot plate is secured to the ankle bone with the axial pin and screw.
INTENDED USE
The Sidekicks is a prosthetic foot designed to replace one or more functions of the biologic human foot.
INDICATIONS:
▪ Lower limb amputations
PROTECTIVE COVER ON DOME
Remove the protective cover on dome after alignment is completed and before patient leaves clinic.
TECHNICAL SPECIFICATIONS
FOOT SIZE
WEIGHT LIMIT
one size
275 lbs / 125 kg
GAIT MATCHING
The gait match determines the firmness of the foot based on the user's specifications
(foot size, patient weight, and impact level).
FIRMNESS CATEGORIES
Refer to the chart below to determine the correct firmness category.
Note: Incorrect category selection may result in poor device function. Contact College Park Technical Service if
you have questions about category selection.
WEIGHT LBS
WEIGHT KG
SIZE CM
LOW IMPACT
Tools Recommended
(1) 4 mm Hex Key
(1) 6 mm Hex Key
(1) Pin Guide
Foot Plate
B.
Axial Pin
D.
Axial Pin Screw - Torque 4 N·m (36 in·lbs)
F.
▪ None known
BUILD HEIGHT
2.3 in / 5.8 cm
GUIDELINES
®
0-120
121-220
0-54
55-100
21-30
1
2
CONTRAINDICATIONS:
FOOT WEIGHT
422 g
221-275
101-125
3
EN
Publicidad
