Selecline XJ-10302J2 Manual De Utilización página 7

5/ OPERATION
WARNING: Always unplug the deep fryer from the wall socket before
assembling/disassembling, filling/emptying the oil tank, cleaning, and after
use.
5.1 ASSEMBLING THE DEEP FRYER
1. Insert the oil tank (7) into the base (6).
2. Hold the main unit (2) above the base (6) and slide the two assembly guides (3)
onto the two tracks on the side panel of the base (Fig. 1). Then push the main unit
straight down to secure in place.
NOTE: The deep fryer is fitted with a safety micro switch. The safety micro switch
will prevent the deep fryer from operating if the main unit is not properly
assembled to the base.
5.2 ASSEMBLING THE FRYING BASKET
To attach the handle to the frying basket, pinch the steel wires and release the prongs
into the dedicated holes in the basket as illustrated (Fig. 2).
5.3 USING THE DEEP FRYER
1. Place the deep fryer on a flat, stable and heat-resistant surface.
2. Ensure the deep fryer is unplugged.
3. Fill the frying basket (9) with prepared food and set aside.
4. Fill the oil tank (7) with fresh cooking oil up to the "MAX" level mark. Do not fill
below the "MIN" or above the "MAX" level marked inside the oil tank.
Fig. 1
Fig. 2
7