Publicidad
Idiomas disponibles
Idiomas disponibles
Plug the power cord into a standard wall outlet.
•
Choose to the appropriate speed setting for your task.
•
For quick or delicate blending tasks, press the Pulse button and
•
hold for a few seconds before releasing (the control dial will
reset to "0" position automatically). Operate this several times
until the consistence you want is obtained.
If you want to add ingredients while the blender is working,
•
remove the measuring cup and place the food through the lid
opening. Replace the mesuring cup once complete.
When crushing ice or hard food, keep one hand firmly on the lid.
•
When the food has reached the desired consistence turn the
•
control dial to the "O" position
NOTE: For each use, the consecutive operation time should be less
than 2 minutes. Then the unit needs at least 10 minutes rest time,
before the next cycle, let the unit cool to room temperature before
performing the next operation cycle.
SPEED SETTING
• Level 1 – 3
for liquids or soft food, for mixing and blending.
• Level 3 – 5
for more solid foods or for chopping
• Pulse & ICE Crush
for short, powerful impulse operation, e.g. for crushing ice cubes
or when cleaning. To prevent overloading of the motor, these
setting should only be used for short periods.
NOTE: When blending dense or hard fruits and vegetables at
maximum capacity, make sure the speed selector is set to the
highest speed. Using a low speed can damage the motor due to
inadequate torque. If you notice the motor running too slowly,
immediately switch to a higher speed setting for blending or turn
the speed selector to "0" to stop blending.
www.hadenusa.com
9
Publicidad
