Preparation For Use; Initial; Power Supply; Calibration - HT Italia HT100 Manual De Instrucciones

HT100

3 PREPARATION FOR USE

3.1 INITIAL

The tester has been checked from a mechanical and electrical point of view before
shipment.
Every care has been taken to make sure that the instrument reaches you in perfect
conditions. However, it's advisable to make a rapid check in order to detect eventual
damages which may have occurred in transit. Should this be the case, enter immediately
the usual claims with the carrier.
Make sure that all the accessories listed in § 6.3.1 are contained in the package. In case of
discrepancies contact the dealer.
In case of returning of the tester please keep to the instructions given in § 7.

3.2 POWER SUPPLY

The instrument is supplied with two 1.5V AAA LR03 batteries, included in the package.
The " " symbol appears when the battery is nearly flat. Replace the battery by following
the instructions given in § 5.2

3.3 CALIBRATION

The tester complies with the technical features listed in this manual. Its performances are
guaranteed for one year.

3.4 STORAGE

In order to guarantee the accuracy of the measurements, after a period of storage in
extreme environmental condition, wait for the necessary time so that the tester returns to
normal measuring conditions (see § 6.2.1).
EN - 5