Electrolux ENG7TE18SX Manual De Instrucciones página 12

12 www.electrolux.com
You can enable or disable the button
sounds in the Setting mode. To enable or
disable the sounds:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
Tap
on or off. The indicator will change to
for the enabled or
disabled sounds.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Temperature units
Using the Setting mode, you can change
the temperature unit displayed on the
control panel from Celsius to Fahrenheit.
To change the temperature unit:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
and
5. DAILY USE
5.1 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1. Gradually pull the shelf up until it
comes free.
2. Reposition as required.
repeatedly until you see
to switch the sounds either
for the
repeatedly until you see
. Tap the indicator showing
the unit to select between
Celsius and
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
.
Factory settings
.
This function restores each setting to the
factory default settings. To restore the
factory default settings:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
and
see
into solid
factory settings are restored.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
.
for Fahrenheit.
repeatedly until you see
. Tap repeatedly until you
.
turns into blinking
, which indicates that
for
.
and then