Uline H-8205 Instrucciones De Montaje página 3

9. Fasten tabletop to mounting plates with six wood
screws using an impact driver and 10 mm socket.
NOTE: For additional security, attach four remaining
wood screws to side panel mounting plate.
(See Figure 5)
10. Using a 10 mm wrench, attach front panel shelf
mount to front panel on each end and in center by
inserting one M6 x 30 mm hex bolt and one small
flat washer into threaded nut. (See Figure 5)
NOTE: Place at same height as back panel
shelf mount.
Figure 5
Shelf
Mount
PAGE 3 OF 9
ASSEMBLY CONTINUED
11. Insert four bottom shelf panels. They should sit on the
12. Insert the center shelf panels with the cut sections
Side Panel
Mounting Plate
13. Disassemble door handle. Reassemble door handle
1-800-295-5510
uline.com
lower shelf lip. (See Figure 6)
facing the back left, back right and center corners
of the cabinet. (See Figure 6)
Figure 6
Shelf Panels
with lock bar. Repeat for other door. (See Figure 7)
Figure 7
Center
Shelf Panels
Bottom
0624 IH-8205