Publicidad
Idiomas disponibles
Idiomas disponibles
G E T T I N G TO K N O W YO U R VAC U U M
Note:
See inside cover.
A.
On/Off Button
B.
Eco/Turbo Mode Button
C.
Vacuum Body
D.
Pre-Motor Filters
E.
Battery Indicator Lights
F.
Battery
G.
Battery Release Button
H.
Metal Filter
I.
Dust Bin
J.
Lid Release Button
K.
Dust Bin Release Button
L.
Vacuum Body Release Button
M.
Charger
N.
2-in-1 Crevice Tool
C O N T R O L S
On/Off Button
•
Turns on/off the vacuum.
Eco/Turbo Mode Button
•
Cycles through Eco Mode and Turbo Mode.
•
The vacuum will default to Eco Mode. Press
once for Turbo Mode. Press again to switch
back to Eco Mode.
•
Eco Mode is suitable for daily cleaning.
•
Turbo Mode is suitable for deep cleaning.
Battery Indicator Lights
•
Indicate the battery level when you are
using the vacuum.
Battery Indicator Light Chart
(During Use)
Battery Level
70–100%
35–70%
10–35%
0–10%
[Figure 1]
Battery Indicators
O.
2-in-1 Pet Tool
P.
Short Stick
Q.
Long Stick
R.
Vacuum Head Release Button
S.
Vacuum Head
T.
LED Lights
U.
Roller Brush
V.
Roller Brush Release Button
W.
Vacuum Handle
X.
Charging Port (on the battery)
Y.
Post-Motor Filter
Z.
Screws
AA.
Wall Anchors
BB.
Wall Mount
U S I N G YO U R VAC U U M
1.
Build the vacuum stick by aligning the dots
on the long stick and short stick, then push
together until they lock in place. [Figure 2]
2.
Attach the vacuum head or a nozzle
attachment to the bottom of the stick, then
attach the vacuum body to the top of the
stick. [Figure 3]
Note: There is a clicking sound when the
parts are properly joined together.
3.
Charge the vacuum (see page 6).
Note: Fully charge the battery before first use.
4.
Press the On/Off Button to turn the vacuum
on. The vacuum will default to Eco Mode.
5.
Press the Eco/Turbo Mode Button to adjust
the suction power between Eco Mode and
Turbo Mode.
6.
Press the On/Off Button to turn the vacuum
off.
EN
5
Publicidad
