cecotec MOUNTAIN VENTUS Manual De Instrucciones página 85

handle until it hardens slightly Finally, operate the handle to close it securely.
4. Make sure that the wheel is correctly centred in the frame, otherwise the balance of the
electric bike may be disturbed. Make sure that the disc brake is on the left side of the
bicycle.
Assembling the pedals. Fig. 5
- Check the marking indicating the left pedal and the right pedal. You will find stickers
indicating this.
- To mount the pedals, the right pedal must be screwed clockwise, and the left pedal must
be screwed counterclockwise with the 15 mm spanner.
Assembling the battery. Fig. 6
1. The electric bike comes with a removable battery. Remove it from the box carefully. Place
it in the space provided for it in the diagonally positioned central tube. Slide it in after
making sure that the battery is correctly aligned.
2. Once in place, insert the spanner into the hole on the right side of the battery. Turn the
spanner clockwise to fix the battery in its place.
3. Press the button on the front end of the battery to ensure that the power supply is
connected and functioning properly.
Charging the battery
Only use the original charger supplied. To start charging, insert the charger into the socket
on the side of the battery and plug it into a power source. The battery will fully charge in 4-6
hours.
4. OPERATION
The electric bicycle will start assisting with electric power once you start pedalling.
Console
Fig. 7.
1. Display information:
2. Speed
3. Battery level
4. Error codes
5. Total mileage
6. Current trip mileage
7. Assistance modes
ENGLISH
85
MOUNTAIN VENTUS