Publicidad
¶ Thank you for purchasing this Pioneer product.
¶ To ensure safe and proper usage, please read the
accompanying Operating Instructions carefully
before using the product.
¶ Keep the Operating Instructions stored in an
accessible place.
Installation Work
÷ This product is sold on the premise that it will be in-
stalled by a professional with sufficient technique and
skills. Make sure to request installation and mounting
from a professional construction company or your sales
agent.
÷ Pioneer shall not be liable in any way for any accidents
or damage resulting from improper installation or mount-
ing, incorrect usage, remodeling, natural disasters or
the like.
Usage Precautions
1. This product is exclusively for use with the 43-inch model
plasma display.
2. It should not be used for any other purpose, such as for
holding a plasma display, or remodeled in any way.
3. The installation site should
(a) be strong enough to support the weight of the plasma
display,
(b) not allow people to easily hang from or bump into the
setup,
(c) not be outdoors or in proximity to hot springs or the
ocean, and
(d) not be subjected to vibration or shock.
(e) In addition, a professional construction company
should be consulted in the event that the walls or ceil-
ing are not structurally sound enough to permit instal-
lation.
(f) Make sure to thoroughly read the Operating Instruc-
tions for the plasma display and heed all other cau-
tions pertaining to the installation site.
4. Assembly and Installation
(a) Follow the assembly procedure and tighten screws in
all of the specified places.
Failure to do so could cause an unexpected accident,
such as the display breaking or falling down after it
has been installed.
(b) For safety reasons, have two or more people perform
the work.
(c) Prior to starting the work, make sure to turn OFF the
plasma display's main power switch and to unplug
the power plug from its outlet.
5. Do not loosen any of the screws, as doing so could cause
the display to fall down or a similar accident.
6. If you detect any abnormalities or poor performance, im-
mediately contact a professional construction company
for repairs.
7. As damage that is not readily visible, such as to the inte-
rior of the display's metal fixtures or the parts mounted
against walls, could cause the display to fall down, make
sure to contact a professional construction company for
related inspection when having the display inspected or
repaired or when having interior finishing done.
We recommend having a professional construction com-
pany make periodic inspections, when possible.
8. With long-term use, the display's metal fixtures could lose
their strength, depending on the environment. To promote
problem-free use, we thus recommend having a profes-
sional construction company inspect the installation ev-
ery five years, as a rule.
6
En
Note to Construction Companies
Prior to installing this product, please read Pioneer's
technical manual thoroughly and heed its content.
Pioneer shall not be liable in any way for any accidents
or damage resulting from other than the specified
assembly, mounting and usage, from remodeling, or
from natural disasters or the like.
7 Service Parts List
Mark No.
Description
Special eye bolt
Flat washer (small)
Monitor mounting bolt
Nut (M8)
Nut with spring washer (M8) AZB1427-
Flat washer (large)
Packing set
Operating instructions
7 Confirming the Parts Provided
Prior to assembly, confirm the parts that have been provided.
(Quantities are indicated in square brackets)
1 PDP bracket [1]
2 Special eye bolt [2]
4 Monitor mounting bolt [4]
6 Nut with spring washer [6]
Parts No.
AZB1426-
WC80FZK
AZB1424-
AZB1425-
WA85F230K200
AZH1150-
AZR1059-
3 Flat washer (small) [2]
5 Nut (M8) [4]
7 Flat washer (large) [4]
Publicidad
