MAINTENANCE
Disposal and end of service life
The defrosting operations of the electrical and hydraulic circuits must be carried out exclusively by qualified technicians.
If present, remove them and dispose them off in a correct manner:
- refrigeration gas;
- anti-freeze solutions present in the hydraulic circuits,
avoiding spillage or losses in the environment.
According to art.13 of Legislative Decree no. 49 of 2014 "Application of Directive RAEE 2012/19/EU on residues of electrical and elec-
tronic equipment"
The mark with stripes on the stripped dumpster specifies that the product was placed on the market after August 13, 2015,
and that, at the end of its service life, must not be mixed with other residues, but disposed off separately.
The whole equipment was built with recyclable metallic materials (stainless steel, iron, aluminium, zinc-coated plates, copper,
etc.) in percentage above 90% of the weight.
Render the equipment unusable when disposing off by removing the power source cable and any other device that closes the com-
partments or cavities (where present).
Care must be taken in the management of this product at the end of its service life, to mitigate negative impacts on the environment
and improve the effectiveness of the use of resources, applying the principles of "who pollutes pays", prevention, preparation for
re-utilisation, recycling and recovery.
We remind that the uncontrolled or incorrect disposal of the product is liable to the application of the sanctions foreseen in the
present legal standards.
Information about disposal in Italy
In Italy, RAEE equipment must be delivered to:
- Collection Centres (also known as ecological islands or ecological platforms)
- the dealers in which new equipment can be purchased, which are requested to collect it free of charge (collection "one for one");
Information about disposal in the European Union nations
The community Directive on RAEE equipment was accepted in different ways by each nation, therefore, if this equipment must be
disposed off, we suggest a contact with the local authorities or the Dealers about the correct disposal method.
While waiting for demolition or disposal, the equipment can be temporarily stored, also in open air, because the unit has its
electrical, refrigeration and hydraulic circuits integrated and closed. However, make sure that the doors cannot be closed to
avoid entrapment.
The laws in force in the user's country concerning environment protection must also be observed.
Rev. 01 - 10/2023
34