Roborock Qrevo MaxV Manual Del Usuario página 13

Environmental
Protection Description
Removing the battery
* The following information applies only when disposing
of the robot and should not be followed for day-to-day
operations
The chemical substances contained in the
built-in lithium-ion battery of this product
can cause environmental pollution. Before
disposing of this product, remove the
battery. The battery should then be properly
recycled either through local authorities
or by providing the batteries to a battery
recycling facility.
How to remove the battery:
1. Operate the robot without connecting to
the dock until it runs out of battery.
2. Turn off the robot.
3. Unscrew the battery cover.
4. Remove the battery cover.
5. Press the latch to pull out the battery
connector and remove the battery.
Notes:
• Before removing the battery, make sure it is fully
drained and the robot is disconnected from the dock.
• Remove the entire battery pack. Avoid damaging the
battery pack casing to avoid short-circuits or leakage
of hazardous substances.
• In the event of accidental contact with battery fluid,
rinse thoroughly with water and seek immediate
medical care.
13