TAD C700 Manual De Instrucciones página 14

Connecting up
CAUTION
' Do not turn on the power to the unit or the other components until all connections have been completed.
' When connecting components or changing connections, always set the power to OFF and disconnect the power cord from
its AC outlet. When making connections, connect the power cord last.
' To avoid the risk of malfunction, never combine the main unit, power source and DC cables in any configurations other
than that shown below.
' Although the power cord to the unit is removable, do not attempt to use a power cord other than
the supplied cord.
1. Use the supplied DC cords to connect the main unit to the power unit.
2. Connect other components.
For information on how to connect other components, consult the operating instructions for the various components you
wish to connect.
3. Connect the supplied power cord to the unit's AC IN connector.
4. Connect the power cord to a standard electrical outlet (USA: AC 120 V; Europe: AC 220 V - 240 V).
Power cord
(supplied)
To AC
Power outlet
The accompanying illustration depicts the use of balanced cables.
When connecting to input connectors 5, or 6, and output connectors 3, 4, or REC OUT (LINE 6), use commercially available
RCA cables and plugs.
14
Power unit
DC2 DC OUTPUT DC1
A C IN
4
3
Balanced cables
(commercially available)
2
R L
OUTPUT OUTPUT
(BALANCED) (BALANCED)
CD player or other audio component
DC cords (supplied)
1
Main unit
ANALOG OUTPUT
4 1 2 3
R
Balanced
cables
(commercially
available)
R L
INPUT INPUT
(BALANCED) (BALANCED)
Two monaural power amplifiers,
or stereo power amplifier
When connecting the DC
cable, press the cable's DC
plug into the connector firmly,
then rotate the locking ring to
secure the connection.
1
2
REC OUT
4
L
Balanced
cables
(commercially
available)
R L
INPUT INPUT
(BALANCED) (BALANCED)
Component with analog recording input
* When the analog recording device is
equipped with balanced input connectors,
connect to LINE 3. When using RCA
cables, connect to LINE 6.