Before Turning On The Power - TAD C700 Manual De Instrucciones

TO BEGIN PLAYBACK

Before turning on the power

Make sure that the input terminals and output terminals are securely connected.
Operation
1. Press the  POWER button on the front of the unit (or the AMP  button on the remote control) to turn on
the power.
Confirm that the power unit's front panel power indicator is lighted orange.
2. Set the unit's VOLUME dial to its minimum setting.
3. Set the power amplifier's power to ON.
Select the input source with INPUT SELECTOR.
Adjust the unit's VOLUME dial to produce the desired level of sound.
4. When finished playing, set the unit's VOLUME dial to its minimum setting and turn OFF (Standby) the power to the power
amplifier and this unit.
TAD-C700 15