Bayrol smart&easy CONTROL MODULE Instrucciones De Uso página 29

Initial commissioning and pairing with the Automatic device
6
1) Make sure your Automatic has the latest software installed. An update is carried out via USB stick (see the
operating instructions of your Automatic). The latest version can be found on our Bayrol Technik support page:
https://www.bayrol.de/bayrol-technik-support
2) As soon as the Smart&Easy Control Module-Icon
the Smart&Easy Control Module can be connected.
– Click on the icon.
– Select "Connect to Smart&Easy Module or Box" and follow the step-by-step instructions.
Your Automatic device may ask for another software update after connecting the Smart&Easy Control Module. This
may be necessary to update also the connected Smart&Easy Control Module to the latest software version.
To access the "Functions" menu, touch the home screen switching icon in the upper left corner.
3) Note: The following statuses are indicated by different icons:
→ No Smart&Easy Control Module connected to the Automatic yet.
→ An existing connection to a Smart&Easy Control Module has been interrupted. All functions of the
Smart&Easy Control Module will be switched off to ensure safety.
→ Connection to the Smart&Easy Control Module is active.
Service
7
2
1) Smart&Easy Control Module icon: contains all the settings needed to use and operate the Smart&Easy Control
Module. Depending on the connection status, further step-by-step instructions are offered, which facilitate the
initial commissioning and provide helpful tips in case of problems.
2) In the "Functions" menu, as shown in the figure, the following information is displayed:
– Display of all selected and integrated functions and their additional properties.
– Clicking on one of the functions will take you to the respective submenu.
– Display of all important measurement parameters in the lower row
appears in the menu bar of your Automatic,
1
1
2
Smart&Easy Control Module icon
Function Menu
29