Trotec BX50 MID Manual Del Usuario página 8

Technical information
Parameter
Model
Weight (packaging excluded)
Dimensions
(length x width x height)
Display
Power supply
Power consumption
Power loss
Measuring range
Basic current (lb)
Starting current
Accuracy class
Indicator resolution
Accuracy
Operating conditions
Storage conditions
Measuring category
Pulse frequency (LED)
Type of protection
MID certification
Disposal
The icon with the crossed-out waste bin on waste electrical or electronic
equipment stipulates that this equipment must not be disposed of with the
household waste at the end of its life. You will find collection points for free
return of waste electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local administration. For
further return options provided by us please refer to our website https://
de.trotec.com/shop/.
The separate collection of waste electrical and electronic equipment aims to
enable the re-use, recycling and other forms of recovery of waste equipment
as well as to prevent negative effects for the environment and human health
caused by the disposal of hazardous substances potentially contained in the
equipment.
8
Value
BX50 MID
approx. 155 g
approx. 119 x 68 x 77 mm (with plug)
LCD with background illumination
230 V AC , 50/60 Hz
10 VA
< 2 W
0.25 to 5 (16) A
5 A
0.004 lb
1
0 to 999999.9 kWh
0 to 999999.9 W
Class B EN 50470-1:2006
Class B EN 50470-3:2006
-25 °C to 55 °C
-40 °C to 70 °C,
<95 % RH (non-condensing)
CAT II
1000 impulses/kWh
IP54
yes
Energiekosten-Messgerät BX50 MID / BX50 MID F / BX50 MID C
Overview of the MID measuring devices used
In accordance with user display as per §32 MessEG via www.eichamt.de
No. Manufac- Type Year in which the
turer designation measuring device
has been designated
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Declaration of conformity
The device has a factory calibration which replaces the initial calibration by a
calibration authority. This is certified by a MID Declaration of Conformity
according to EU Directive 2014/32/EU. The validity of this declaration expires
8 years after placing on the market. Afterwards the user of the measuring
device is obliged to have the device recalibrated. The year of initial calibration
is indicated on the device after the CE mark. Example:
M19: The device was manufactured and first calibrated in 2019. If the device
is also placed on the market in 2019, the calibration validity ends at the end
of 2027. If the device is not placed on the market until 2020, the calibration
validity ends at the end of 2028.
0120: Number of the accredited calibration laboratory. Here: SGS
The following page shows the original declaration of conformity certifying
compliance with the relevant regulation.
Address of person
using the
measuring device
M19
EN