Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2.
Clean the bar groove with the scraping hook (not
included).
3.
Clean the lubrication holes.
4.
Remove burr from the edges and level the cutters
with a flat file.
Replace the bar if:
• the groove does not fit with the height of the drive
links (which must never touch the bottom).
• the inside of the guide bar is worn and makes the
chain lean to one side.
11
TRANSPORTATION AND STORAGE
Before you move the machine, always
• Remove the battery pack from the machine.
• Engage the chain brake.
• Keep hands clear of the lock-out button.
• Put the scabbard on the guide bar and the chain.
Before you put the machine into storage, always
• Remove all residual oil from the machine.
• Remove the battery pack from the machine.
• Clean all unwanted material from the machine.
• Make sure that the storage area is
• Not available to children.
• Away from agents which can cause corrosion,
such as garden chemicals and de-icing salts.
12
TROUBLESHOOTING
Problem
The guide bar
and the chain
become hot and
release smoke.
Possible cause Solution
The chain is too
Adjust the chain
tight.
tension.
The oil tank is
Add bar and
empty.
chain oil.
Contamination
Remove the
causes a block-
guide bar and
age of the dis-
clean the dis-
charge port.
charge port.
Contamination
Clean the oil
causes a block-
tank. Add new
age of the oil
lubricant.
tank.
Contamination
Clean the guide
causes a block-
bar and the oil
age of the guide
tank cap.
bar and the oil
tank cap.
Contamination
Clean the
causes a block-
sprocket and
age of the
the guide
sprocket or
wheels.
guide wheels.
English
Problem
The motor runs
but the chain
does not rotate.
The motor runs
and the chain
rotates, but the
chain does not
cut.
14
Possible cause Solution
The chain is too
Adjust the chain
tight.
tension.
Replace the
The guide bar
guide bar and
and the chain
the chain if it is
are damaged.
necessary.
1.
Remove
the battery
pack from
the ma-
chine.
2.
Remove
the guide
bar cover.
3.
Remove
the bar
and saw
chain.
The motor is
4.
Clean the
damaged.
machine.
5.
Install bat-
tery pack
and oper-
ate the
machine.
If the sprocket
rotates, it
means the mo-
tor works prop-
erly. If not, call
service center.
Sharpen or re-
The chain is
place the saw
blunt.
chain.
The chain is in
Turn the chain
the incorrect di-
loop to the oth-
rection.
er direction.
The chain is
Adjust the chain
tight or loose.
tension.
Publicidad
