Symbols on the machine:
WARNING! Chainsaws can be
dangerous! Careless or improper use
can result in serious or fatal injury to
the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
•
Approved protective helmet
•
Approved hearing protection
•
Protective goggles or a visor
Both of the operator's hands must be
used to operate the chainsaw.
Never operate a chainsaw holding it with
one hand only.
Contact of the guide bar tip with any
object must be avoided.
Recommended cutting
equipment in this example: -
Bar length 16 inches - Max.
nose radius 10T - Chain type
RedMax H30
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar up
and towards the operator. May cause
serious personal injury.
Chain brake, activated (right) Chain
brake, not activated (left)
Ignition; choke: Set the choke control in
the choke position. This should
automatically set the stop switch to the
start position.
Air purge
KEY TO SYMBOLS
Chain oil fill.
Refuelling.
Adjustment of the oil pump
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
RedMax
6
–
English
7