IQ EV Charger User Manual
Instructions pertaining to a risk of fire or electric shock
When using the IQ EV Charger, basic electrical safety precautions
should be followed:
•
Use this EVSE to charge electric vehicles with an
SAE J1772 or NACS charge port only. Consult the vehicle's
owner manual to determine if the vehicle is equipped with
the correct charge port.
•
Ensure the EVSE charge cable is positioned so it is not
stepped on, tripped over, or otherwise subjected to damage
or stress.
This product contains NO user-serviceable parts. Refer to
•
the Customer Support section in this manual for service
information. DO NOT attempt to repair or service the
EVSE yourself.
DO NOT operate your EVSE if it or the charge cable
•
and connector assembly are physically open, cracked,
frayed, or otherwise visibly damaged. Contact a Service
Representative for service immediately. Consult the
Customer Support section in this manual for information on
the Service Representative in your area.
•
Not for use in commercial garages where a
COMMERCIAL GARAGE is defined as a facility (or
portion thereof) used to repair internal combustion vehicles
in which the area may be classified due to flammable
vapors being present (such as from gasoline).
DO NOT place fingers inside the coupler end of the
•
charge cable connector plug.
DO NOT allow children to operate this device. Adult
•
supervision is mandatory when children are in proximity to
an EVSE that is in use.
6