Voice Notifications and LEDs
Action
Slide toggle switch to center
Power On
Power Off
Connected to PC
or mobile device
Lift to Mute
Pairing Mode
Battery level
Press and hold the ANC and
Clearing Pairing
Active Noise
Cancellation
Charging
Call Answer
Under 20%, low battery level
Low Battery
is reported every 10 minutes
position
Slide toggle switch to off
position
Power on the headset after
initial pairing
Lift boom arm
Lower boom arm
Slide toggle switch to pair-
ing position
Double pressing the ANC
Button
volume knob simultane-
ously
Press the ANC Button for 2
seconds
Plug in charging cable or
dock the headset
Incoming / Answered /
Ended
Voice (English)
"Welcome to V7"
"Goodbye"
Blue LED indicator (pg. 2) flashes every
"Connected"
"Muted"
"Unmuted"
"Pairing"
"Battery xx%"
Audible tone
"ANC On" / "ANC Off"
-
-
"Battery Level"
LED display
Blue LED indicator (see fig. 2, #6)
flashes every second
LED turns off
second
-
-
Blue LED indicator fast-flashes
-
LED Indicator flashes Blue-Red
-
Red LED lights while charging
Busy light LED (see fig. 2, #9) flashes
RED on incoming calls, solid while on
call. LED is off when disconnected
Red LED flashes 3 x every 10 minutes