Klarfit Goldie Small Manual Del Usuario página 25

2. Attaching the wheels
Insert wheel axle into axle receiver underneath the trailer frame until it snaps in place (Figure
4). Pull firmly on wheel to confirm the axle is fully engaged (Figure 5). To remove the wheels,
press the button on the axle receiver and take the wheels out.
Figure 4
3. Installing the tow bar
Fix the tow bar receiver to main frame as
shown (Figure 6)
Pressing the spring button, slide the tow bar
into the tow bar receiver until the spring
button comes out of the hole A. Insert the
safety pin from the hole B through the other
side. Make sure the safety pin is properly
locked in place.
Figure 5
Figure 6
EN
23