Klarfit Goldie Small Manual Del Usuario página 28

EN
ATTACHING TRAILER TO BICYCLE
1. Quick release Axle
Remove the quick release from the left
side of bike's rear axle. Install the hitch
between the quick release and frame.
Tighten the quick release following the bike
manufacturer's manual. Hitch can remain on
the bike when the trailer is removed (Figure
13).
2. Nutted Axle
Unscrew the nut with washer from the left
side of bike's rear axle. Install the hitch onto
the axle and screw the nut back on with the
washer (Figure 14).
26
WARNING!
Danger of serious injury or death
• The tension-adjusting nut must engage the threads for at least five full
turns in order to ensure adequate clamping force for holding the rear
wheel securely.
• Failure to tighten the tension-adjusting nut fully may result in
accidents with serious injury or death. If the quick release skewer is
too short, it must be replaced.
• Consult a professional bicycle mechanic for the appropriate parts and
assistance.
Figure 13
Figure 14