Rocket Espresso Milano APPARTAMENTO Manual De Uso Y Mantenimiento página 63

REMOVING THE SPRAYER, DIFFUSER
AND HEAD GASKET
1. Using a small slotted screwdriver, pry
the inner edge of the sprayer (1) and
remove it together with the gasket (2)
as shown in fig_8.3.
2. With the same screwdriver, unscrew the
diffuser (3) from the head (fig_8.4).
fig_8.3
3.
Scrub the inside of the unit head with the
unit cleaning brush supplied (fig_8.5).
4. Using a damp cloth, clean the area
where the portafilter connects to the unit
head.
5.
Soak the metal parts that have been
removed in a solution made from 2 tea-
spoons of espresso cleaning detergent
and hot water. Soak for 10 minutes. Rinse
thoroughly, clean and reassemble.
6. Screw the head diffuser back on re-
specting the order shown in figure 8.6.
Lastly, insert and hook the sprayer with
its gasket
If the elements of the head are worn or
damaged, replace them. These items are
consumables. Contact your authorised
ROCKET dealer.
fig_8.4
APPARTAMENTO
fig_8.5
fig_8.6
63