Bosch GCT30-42 Instrucciones De Funcionamiento Y Seguridad página 15

— Once pairing between the cordless dust extractor and
the Auto-Start Remote 1 was successful, ensure that
the Auto-Start Remote 1 is flush and snug against the
mounting surface of the cordless tool by adjusting the
position on the supplied attachment band.
— Insert the extraction hose into the dust extractor at-
tachment of the cordless tool.
— Once the cordless power tool is turned on/off, a start/
stop signal is sent from the Auto-Start Remote 1 to
the cordless dust extractor and the dust extractor is
turned on/off.
Utilizing Manual Mode
— Briefly press the Start/Stop Button 3 on the Auto-Start
Remote 1. The dust extractor will be switched on.
— To manually switch the dust extractor off, press the
Start/Stop Button 3 on the Auto-Start Remote 1 again.
Note: If the dust extractor is switched off using the Start/
Stop Button 3 on the Auto-Start Remote 1, the dust ex-
tractor will automatically switch on once the Auto-Start
Remote 1 detects the vibrations of the activated cordless
tool.
160992A8R4 GCT30-42 202310.indd 15
15
10/5/23 4:26 PM