Publicidad
ENGLISH
can use cookware with diameters smaller than this limit.
Box content
- Induction hob
- Instruction manual
- Sealing tape
- Support feet
3. INSTALLATION
Selection of the installation tools
- Cut out the worktop according to the dimensions shown in the figure.
- For its installation and use, you must keep a space of at least 5 cm around the gap.
- Make sure that the thickness of the worktop is at least 30 mm.
- Place a towel or cloth on the hob and place the induction hob face down on it.
Place the sealing tape supplied with the induction hob to seal it on the hob. Fig. 3
·Do not use silicone. Apply the tape to the edge of the bottom of the induction
hob, leaving about 3 mm from the edge of the glass. Apply the tape all around the
perimeter.
·Cut off the excess and join the two ends of the tape to match.
Warning: the worktop material should be impregnated wood or other insulating
material. FIG. 4
Type
Lenght
(mm)
AI320
590
In any case, make sure the induction hob is well ventilated and the air inlet and outlet
are not blocked. Make sure the induction hob works correctly.
Note: the safety distance between the hob and a cabinet over the hob must be at
38
EVVO PLACA DE INDUCCIÓN V61
Width
Height
(mm)
(mm)
520
60
Depth
A (mm)
(mm)
56
560
Ampli-
X (mm)
tude
(mm)
490
50
Publicidad
