Publicidad
The induction
hob makes a
slight buzzing
sound when used
at high power
Fan noise from
the induction
hob
Cookware does
not heat up and
does not appear
on the display
The induction
hob
or a cooking zone
has turned off
unexpectedly,
emits a sound
and an error code
is displayed
If a fault occurs, the induction hob will automatically go into protection mode and
display the corresponding fault codes:
Problem
E2/E3
This is due to the induc-
tion cooking technology.
A cooling fan integrated
in this induction hob
has been activated to
prevent overheating of
the electronic compo-
nents. It may still operate
even after turning off the
induction hob.
The induction hob does
not detect the cookware
because it is not suitable
for induction cooking.
The induction hob does
not detect the cookware
because it is too small for
the cooking zone or not
well centred on it.
Technical fault.
Possible causes
No cooking utensil or
unsuitable utensil.
Abnormal supply voltage.
It is usual, but the noise should
decrease or completely disappear
by lowering the power setting.
This is normal and not a cause for
concern.
Do not unplug the hob from the
mains if the fan is still running.
Use only cookware compatible
with the induction hob. See
section on "Choosing the right
cookware".
Centre the cookware and make
sure its base matches the size of
the cooking zone.
Note down the error codes, dis-
connect the induction hob from
the power supply and contact a
qualified technician.
Possible solution
Change the cookware.
Check if the power supply opera-
tes correctly. After connecting to
the mains, the product turns on
as usual.
EVVO PLACA DE INDUCCIÓN V61
ENGLISH
49
Publicidad
