sunjoe CJ601E Manual Del Operador página 10

Fig. 10
Hopper
locking
knob
1. Make sure the removable safety switch is in the OFF
position. Plug the wood chipper + shredder's appliance cord
using an approved extension cord, making a knot with the
two cords (Fig. 11).
Fig. 11
Extension
cord
Appliance
cord
2. Push the removable safety switch to the ON position to
power the wood chipper + shredder on (Fig. 12).
Fig. 12
3. To power the wood chipper + shredder off, push the
removable safety switch to the OFF position. To disable the
machine, remove the safety switch completely
(Fig. 13).
Fig. 13
Removable
safety switch
NOTE: As a safety precaution, the removable safety switch
can be removed when you are not using the wood chipper +
shredder to prevent children from starting it accidentally. The
unit cannot be started when the safety switch is removed. Make
sure to replace the removable safety switch before operation.
Basic Shredding Procedure
m
WARNING!
wear gloves during operation.
1. Connect the wood chipper + shredder to a proper power
source and switch on the unit; the wood chipper + shredder
will start to work. Insert the shredding material inside the
hopper through the feeding funnel to shred them (Fig. 14).
Fig. 14
Removable
safety
switch
2. Use the paddle to push the material inside the hopper if
needed (Fig. 15).
10
Always wear ear and eye protection and
Insert the
shredding
material
Feeding
funnel