sunjoe CJ601E Manual Del Operador página 12

Fig. 17
5. Clean the cutting blades and the discharge area. Remove
wood sticks or objects that may clog the blades. Check the
blades for damage.
6. After cleaning the inside of the wood chipper + shredder,
replace the hopper and lock the hopper locking knob by
turning it clockwise (Fig. 18).
Fig. 18
Hopper
locking
knob
Cutting Blade Replacement
The wood chipper + shredder has two reversible blades
that are attached to a rotary plate with two bolts. Before any
maintenance or cleaning is done on the blades, always turn the
switch off and disconnect the plug from the outlet.
m
WARNING!
Be sure to wear protective gloves when
handling the blades.
IMPORTANT: Only use original replacement parts specified for
this wood chipper + shredder.
You can purchase a replacement blade (Model CJ601E-RBLD)
and other genuine replacement parts by ordering online at
shopjoe.com or, to order by phone, contact All Season Power
customer service at 1-866-225-9723. The use of parts that
do not meet the original equipment specifications may lead to
improper performance of the wood chipper + shredder, may
compromise operator safety, and will void the manufacturer's
warranty.
1. Stop the motor and disconnect the unit from the power
supply.
2. Unscrew the hopper locking knob counterclockwise to open
the hopper (Fig. 17).
3. Align the cutting head past the splash guard so that the
blade bolts can be removed; secure the cutting head from
Hopper
rotating by inserting a rod (e.g. a screwdriver) or rag between
locking knob
the cutting head and body. Unscrew the blade bolts using
the supplied hex key, and remove the blade
Fig. 19).
4. Reverse the direction of the original blade, or install a new
blade. Align the slots on the blade with the grooves on the
cutting head. Tighten the bolts with the supplied hex key
(Fig. 19).
Fig. 19
5. Repeat step 3 and 4 to replace the other blade.
6. Replace the hopper; tighten the hopper locking knob by
turning it clockwise.
12
Bolts
Blade
Splash
guard