Etac R82 Gazelle PS Manual Del Usuario página 15

A
EN
Foot support
For use of back standing:
When the knee support is turned, the foot
supports must be mounted in the same side as
they were demounted.
1. Mount the foot supports and tighten the
handle. (A).
2. Loosen the screw (B) and adjust the depth
of the foot support.
3. Loosen the screws (C) and turn the foot
support 180°.
4. Tighten the screws in the requested
B
position.
The foot plate mounting is mounted on the
joint. By means of this, the footplate can be
adjusted in different angles by loosening the
screws (C) .
The plate can be adjusted in the depth by
loosening the handle (D), or the unbracho
screw (B).
C
15
D
etac.com