cecotec ENERGYSILENCE 490 FRESHESSENCE Manual De Instrucciones página 54

ENGLISH
- If the water tank (15) is empty, the indicator light will turn red.
- To adjust the mist level, turn the knob (G) according to your needs.
Note: the mist and speed functions can operate independently or together.
Remote control
- To activate and configure the functions, you can use either the remote control or the
control panel.
- The remote control is powered by a CR2025 battery. Before using the appliance for the first
time, remove the transparent film covering the battery.
- If you notice that the battery is depleted or you do not plan to use the product for an
extended period of time, we recommend that you follow the steps described on the back
of the remote control.
1. Locate the battery-compartment cover on the back of the remote control and open it.
2. Remove the used battery carefully, paying attention to its orientation and polarity.
3. Insert the new CR2025 battery, making sure to insert it in the correct direction.
4. Close the battery-compartment cover.
5. Test the remote control to make sure that it works properly with the new battery.
5. CLEANING AND MAINTENANCE
Note:
Before cleaning the appliance, make sure that it is switched off and disconnected from the
mains.
- Do not immerse the device in water or splash it with any other liquid.
- Do not use solvents or any other chemical products for cleaning. When the fan is not in use,
clean it and store it in a dry place.
Cleaning the exterior
- Before carrying out any cleaning work, be sure to switch off and disconnect the fan from
the power supply to avoid any accidents.
- Carefully clean the outside surface of the fan with a soft cloth slightly dampened with
soapy water. Avoid using aggressive or abrasive cleaning agents, as they may damage the
housing.
- Make sure to dry the device completely with a dry cloth before reconnecting it to the power
supply.
54 ENERGYSILENCE 490 FRESHESSENCE