Xiaomi S10+ Manual De Usuario página 13

Omnidirectional Wheel
1. Flip the robot vacuum over and pull out the
omnidirectional wheel.
2. Remove hair, dirt, and other debris from the
wheel and axle.
3. Reinsert the wheel and press it firmly back into
place.
Notes:
· A small screwdriver or other pry tool can be used to gently pop out and remove the wheel.
· The wheel can be cleaned with water and reinstalled after drying.
Dust Compartment
* It is recommended to clean every week.
1. Open the cover of the robot vacuum, and press the dust compartment clip to
remove the dust compartment upwards.
2. Open the dust compartment cover, and empty out the contents.
Note:
To prevent the filter from becoming clogged, lightly tap the dust compartment when
emptying its contents.
12
* Clean it as needed.
Wheel
Axle
Filter
* It is recommended to clean every two weeks.
1. Remove the filter from the filter clip as illustrated.
2. Rinse and gently tap the edges of the filter to remove any dust and debris until
it is clean.
Note:
Do not attempt to clean the filter with a brush or finger.
3. Open the dust compartment cover, fill the dust compartment with clean water
and close the dust compartment cover. Shake the dust compartment from
side to side and then pour the dirty water out of the compartment.
4. Place the dust compartment and filter aside to dry before reinstallation.
Notes:
· Only use clean water to clean the filter. Do not use detergent.
· Thoroughly dry the dust compartment and the filter before putting them back.