Audi 8E0 051 444 BA Manual De Instrucciones página 16

Playing iPod tracks:
iPod tracks are played in the same way as using a CD-changer, i.e. by using the radio's buttons. Further
information regarding operation can be found in the model specific sections in this handbook as well as
in the "CD-changer" chapter in the radio or navigation system/radio handbook.
Choosing from the iPod's play lists:
iPod tracks are played in the same way as you would use a CD-changer, i.e. by using the radio's buttons.
Further information regarding operation can be found in the model specific sections in this handbook as
well as in the "CD-changer" chapter in the radio or navigation system/radio handbook.
Note
●
If you select an empty or non-existent iPod play list then play will start automatically from the next
available play list.
●
A track from the previous play list might be played when changing play lists, but this depends on the
radio being used. The function is a system dependent and is not a defect.
Skipping forwards or backwards from a track:
Use the radio's knob/push button or control wheel/button or the other buttons to skip forwards or back-
wards from a track the same as you would when operating a CD-changer. Further information regarding
operation can be found in the model specific sections in this handbook as well as in the "CD-changer"
chapter in the radio or navigation system/radio handbook.
Note
●
When using the knob/push button or control wheel/button with certain radios it is only possible to
skip forwards or backwards to track number 99. Tracks with higher track numbers must be selected
using the buttons. The first digit in a three-digit number will be suppressed on the radio's display if
you choose a track with a three digit number.
●
Very fast and repeated forward or backwards track skipping might well result in delays and the audio
will be muted for a long period. The skipped tracks will be played briefly under certain circumstances.
Fast forwards and backwards skipping:
Fast forwards and backwards skipping is carried out in the same way as when you use a CD-changer,
i.e. by using the radio's buttons. Further information regarding operation can be found in the model spe-
cific sections in this handbook as well as in the "CD-changer" chapter in the radio or navigation system/
radio handbook.
Automatic track playing (SCAN):
The SCAN function can be used to start a search and each track in the current play list will be played for
a few seconds.
−
Activate the SCAN function to start automatic track playing.
−
Select SCAN once again to select the track that is currently being played and to terminate the auto-
matic track playing function.
Random selection (RANDOM or MIXED play):
Random selection can be activated via the radio's or navigation system/radio's menu and this enables
tracks to be played from the play lists in random order.
Note
●
If the random track function is already activated when the iPod is connected up it will be accepted
automatically for use with the radio or navigation system/radio and can be deactivated by pressing
RANDOM or MIX twice.
●
The track numbers displayed on the radio will run consecutively. The track number from the play list
will be displayed on the iPod. This means that you will have different numbers displayed on the two
units.
16