Tornado Tempest Manual De Operaciones Y Mantenimiento página 6

● TV400-W26-U
Push handle
1
Storage net
2
Star screw for push handle adjustment (2x)
3
Cover
4
Rear wheel (2x)
5
Side brush, right
6
Adjustment dial for side brush
7
Adjusting the contact pressure
–
Raise the side brush
–
Lever for lowering of side brush
8
Adjustment dial for contact pressure of roller brush
9
Display of contact pressure of roller brush
10
LED does not light up: Lower the roller brush further
–
LED green: correct adjustment
–
LED red: Raise the roller brush
–
On/Off switch
11
Lock of the battery
12
Battery compartment
13
"Battery Power +" charger
14
Sold separately
–
Battery "Battery Power+ 36/75"
15
Sold separately
–
Waste container, removable
16
A dust bag (option) can be inserted into the waste con-
–
tainer.
Lock of the waste container
17
Recessed grip of cover
18
Product rating label
19
Compartment for replacement battery (with retaining
20
strap)
6
Description of the unit
Battery and charger sold separately
Device illustration
Safety devices protect the user and may not taken out of
operation or functionally circumvented.
The cover switch prevents the device from starting when
the device cover is open.
The On/Off switch prevents the device from starting up un-
intentionally. Switch off the On/Off switch when switching
off the device or in the event of danger.
If the roller brush is overloaded, the electronics switch off
the device and the LED flashes.
In this case, switch off the device using the On/Off switch,
and before switching it on again, turn the roller brush all the
way up using the contact pressure adjustment.
English
Safety devices
Cover switch
On/Off switch
Electronics