Publicidad
Idiomas disponibles
Idiomas disponibles
Storage
WARNING
Risk of injury and damage
Be aware of the weight of the device.
1. Park the device in a sheltered, level and dry place.
2. Remove the battery.
a Observe the notes in the operating instructions for
storing the battery.
3. Clean the inside and outside of the device.
4. Lift the twist grip of the roller brush and turn it counter-
clockwise all the way up.
Care and service
General notes
DANGER
Risk of accident and injury from unintentional move-
ment of the device
Switch off the device and unplug the battery before starting
any care or maintenance work.
Cleaning the device
CAUTION
Short circuit hazard from water stream
Do not clean the device with a hose or high pressure water
jet.
DANGER
Health risk from dust
Wear a dust mask and safety goggles when cleaning with
compressed air.
ATTENTION
Risk of damage to the surfaces
Do not use any abrasive or aggressive detergents for
cleaning.
1. Blow out the inside of the device with compressed air.
2. Clean the interior and exterior of the device using a
damp cloth, wetted with a mild detergent.
Maintenance intervals
Maintenance by the customer
Note
All service and maintenance work must be carried out by
qualified staff; if necessary, an authorized Tornado service
dealer can be called in at any time.
● Daily maintenance
1 Check roller brush and side brush for wrapped straps.
2 Check the function of all control elements.
● Weekly maintenance
1 Check moving parts for ease of movement.
2 Check sealing strips in the sweeping area for adjust-
ment and wear.
3 Check the roller brush and side brush for wear.
4 Check the filter box, clean the pre-filter if necessary.
5 Check dust filter, clean if necessary (depending on fre-
quency of use, approx. every 10 hours).
● Monthly maintenance
1 Remove the roller brush and remove dirt from the drive
pin (see chapter "Checking / changing the roller brush")
● Maintenance after wear and tear
1 Adjust or change sealing strips.
2 Change the roller brush.
3 Change the side brush.
Note
For descriptions, see section "Maintenance work".
Maintenance by customer service
Note
In order to maintain warranty claims, all service and main-
tenance work must be carried out by the authorized ser-
vice dealer during the warranty period.
1 Have maintenance work carried out in accordance with
the inspection checklist.
Cleaning/changing the dust filter
DANGER
Health risk due to dust
Wear a dust mask and safety goggles when working on the
filter unit.
Locks (2x)
1
Lid of filter casing
2
Filter box
3
1. Switch off the device and turn it off at the ON/OFF
switch.
2. Open the cover.
3. Open the locks.
4. Swivel the lid upwards.
5. Remove the filter box with the dust filter facing upwards.
Filter box
1
Dust filter
2
Pre-filter, removable
3
6. Check the dust filter and pre-filter.
a To clean, vacuum the dust filter or tap it out together
with the filter box (do not wash it out).
b Pull out the pre-filter and clean it.
English
Maintenance work
9
Publicidad
