cecotec ENERGYSILENCE AERO 5600 AQUA CONNECTED Manual De Instrucciones página 45

4. OPERATION
Remote control. Fig. 11
1. Power button
2. Speed control
3. Winter function
4. Summer function
5. Natural Breeze
6. Natural Breeze shut-off
7. Timer
8. Light
- Use the 6 speed buttons to select the air power level.
- Press the power button to turn the device off.
- Use the 3 timer buttons to select the fan's operation time: 1, 2, or 4 hrs. The fan will turn off
once the selected time has elapsed.
- Press the light button to turn the fan's lamp on and off.
- The remote control requires 2 x 1.5 V-3 AAA batteries.
Winter Function: press button 3 for the fan to make air flow from the bottom upwards,
bringing cold air to the top of the room.
Summer Function: press button 4 for the fan to make air flow from the top downwards,
bringing cold air to the bottom of the room.
Natural Breeze: activate this mode by pressing the corresponding button on the remote
control. The fan will run at different power levels in a cycle, producing a feeling of fresh air.
Warning:
Invert the spinning direction of the fan while in operation. Hold down the button for approx.
3 seconds: the appliance will beep, and the blades will start slowing down until they stop
spinning. After a few seconds, they will start spinning again in the opposite direction.
Pairing the remote control with the fan: Press the power button for 5 seconds until you hear
a beep.
Wi-Fi connection: press the 1h and 4h button simultaneously for 5 seconds until you hear a
beep. Follow the instructions in section 5. Wi-Fi connectivity and mobile App.
ENERGYSILENCE AERO 5600 AQUA CONNECTED | 5285 SUN CONNECTED
ENGLISH
45