Lenco LPJ-280WH Manual De Usuario página 17

Connecting an AV Source
Follow the picture below to connect a device with an AV cable.
1. Turn off the unit before connecting the AV cable.
2.
Use the AV cable to connect a device as shown in the image below.
3.
After connecting, press the
indicator will light up GREEN
4. Press the
device will show on the projector screen.
5. Press the
Connecting a VGA source
Follow the picture below to connect a device with a VGA cable.
1. Turn off the projector before connecting the VGA cable.
2. Press the
connecting.
3. After connecting, press the
power indicator will up light GREEN
4. Press the
VGA device will show on projector screen.
5. Press the
button to turn on the projector and the power
/SOURCE button to go to the AV mode and the video of AV
button to turn off the unit power.
button to turn off the power of your projector before
/SOURCE button to go to the VGA mode and the video of
button to turn off the unit power.
button to turn on the projector and the
16