Publicidad
Installation (Figure A)
Figure A takes the H30 mounted to the Matrice 350 RTK aircraft as an example.
• Make sure the gimbal connector on the aircraft is positioned correctly when mounting.
Otherwise, the camera cannot be mounted.
• Only remove the gimbal camera after powering off the aircraft.
• Remove the gimbal camera by pressing the button on the aircraft and detach the gimbal
camera.
• Make sure the microSD card slot cover is firmly in place to prevent dust or moisture
entering during usage or transportation.
• Detach the gimbal camera from the aircraft during transportation or storage. Otherwise,
the service life of the damper balls may be shortened or they may even be damaged.
Camera Controls
Remote Controller
With the buttons on the DJI RC Plus remote controller, users can switch between different camera
views, adjust the camera zoom, and control the gimbal and camera.
1
3
3
4
5
6
1. L1/L2/L3/R1/R2/R3 Buttons: Go to
Camera View in DJI Pilot 2 to view the
specific functions of these buttons. Refer
to the DJI Pilot 2 App section for details.
2
1
2. 5D Button*
3. Customizable C1/C2/C3 Buttons*
4. Left Dial: Adjusts the tilt of the gimbal.
5. Record Button: Press once to start or
stop recording.
3
6. Focus/Shutter Button: Press the button
halfway down for autofocus and all the
way down to take a photo.
7. Right Dial: Adjusts the pan of the gimbal.
8. S c r o l l W h e e l : A d j u s t s t h e z o o m
magnification level of the zoom camera.
8
7
6
* The function of these buttons can be
customized in the DJI Pilot 2 app.
Publicidad
